This enumerative constant describes the message tags different processes of Alps understand.
| Enumerator |
|---|
| AlpsMsgContOrTerm |
The message tag indicating that the send ask the recv to continue or terminate.
|
| AlpsMsgAskDonate |
Ask the receiver worker to donor workload to the specified worker.
|
| AlpsMsgAskDonateToHub |
Ask the receiver worker to donor workload to the specified hub.
|
| AlpsMsgAskHubShare |
Aks the receiver hub to share workload with the specified hub.
|
| AlpsMsgFinishInit |
The message tag indicating that initialization is finished.
|
| AlpsMsgHubLoad |
Hub load, msg counts are in the buf.
|
| AlpsMsgAskLoad |
The message tag indicating that the send ask the recv to send its load information.
|
| AlpsMsgAskPause |
The message tag indicating that the send ask the recv to pause current work immediately or after finishing the work on hand.
|
| AlpsMsgAskTerminate |
The message tag indicating that the send ask the recv to terminate.
|
| AlpsMsgIdle |
The message tag indicating that the process sent the message is idle.
|
| AlpsMsgIncumbent |
The message tag indicating that a incumbent is in the message buf.
|
| AlpsMsgLoadInfo |
The message tag indicating that cluster and system workloads are in the message buf.
|
| AlpsMsgWorkerNeedWork |
The message tag indicating that the sender has no workload.
|
| AlpsMsgModel |
The message tag indicating that a model is being sent or received.
|
| AlpsMsgNode |
The message tag indicating that a node is being sent or received.
|
| AlpsMsgParams |
The message tag indicating that parameters are being sent or received.
|
| AlpsMsgTermCheck |
Termination check.
|
| AlpsMsgHubCheckCluster |
Hub check the status of its workers.
|
| AlpsMsgHubPeriodCheck |
Hub periodically check the status of its workers.
|
| AlpsMsgHubPeriodReport |
Hub periodically report its status to master.
|
| AlpsMsgHubStatus |
Hub's status is in buf.
|
| AlpsMsgWorkerStatus |
Worker's status is in buf.
|
| AlpsMsgHubTermStatus |
Hub's status is in buf, used in termination checking.
|
| AlpsMsgWorkerTermStatus |
Worker's status is in buf, used in termination checking.
|
| AlpsMsgSize |
The size of the message.
|
| AlpsMsgSubTreeByMaster |
Send or receive a subtree due to master load balancing.
|
| AlpsMsgSubTree |
Send or receive a subtree due to hub load balancing.
|
| AlpsMsgNodeSize |
Tree node size.
|
| AlpsMsgTellMasterRecv |
|
| AlpsMsgTellHubRecv |
|
| AlpsMsgIndicesFromMaster |
|
| AlpsMsgWorkerAskIndices |
|
| AlpsMsgForceTerm |
|
| AlpsMsgMasterIncumbent |
|
| AlpsMsgHubIncumbent |
|
| AlpsMsgAskHubPause |
|
| AlpsMsgAskDonateToWorker |
Ask the receiver worker to donor workload to the specified worker.
|
| AlpsMsgSubTreeByWorker |
|
| AlpsMsgIncumbentTwo |
|
| AlpsMsgModelGenRampUp |
The message tag indicating that knowledge generated during rampup about model is being sent or received.
|
| AlpsMsgModelGenSearch |
The message tag indicating that knowledge generated during search about model is being sent or received.
|
| AlpsMsgHubFailFindDonor |
When requested by master during inter balance, hub failed to identify a donor worker.
|
| AlpsMsgRampUpLoad |
Load info during ramp up.
|
| AlpsMsgRampUpDonate |
Donate during ramp up.
|
| AlpsMsgFinishInitHub |
Hub finished ramp up.
Used in spiral method.
|
| AlpsMsgErrorCode |
Error code.
|
