-
LP_verbosity - integer (0).
- [p]LP Parameters!LP_verbosity
Verbosity level of the LP module.
-
set_obj_upper_lim - boolean (FALSE).
- [p]LP Parameters!set_obj_upper_lim
Whether to stop solving the LP relaxation when it's optimal value is
provably higher than the global upper bound. There are some advantages
to continuing the solution process anyway. For instance, this results
in the highest possible lower bound. On the other hand, if the matrix
is full, this node will be pruned anyway and the rest of the
computation is pointless. This option should be set at FALSE for
column generation since the LP dual values may not be reliable otherwise.
-
try_to_recover_from_error - boolean (TRUE).
- [p]LP Parameters!try_to_recover_from_error
Indicates what should be done in case the LP solver is unable to solve
a particular LP relaxation because of numerical problems. It is
possible to recover from this situation but further results may be
suspect. On the other hand, the entire solution process can be
abandoned.
-
problem_type - integer (ZERO_ONE_PROBLEM{0}).
- [p]LP Parameters!problem_type
The type of problem being solved. Other values are INTEGER_PROBLEM{1} or MIXED_INTEGER_PROBLEM{2}.
(Caution: The mixed-integer option is not well tested.)
-
cut_pool_check_frequency - integer (10).
- [p]LP Parameters!cut_pool_check_frequency
The number of iterations between sending LP solutions to the cut pool
to find violated cuts. It is not advisable to check the cut pool too
frequently as the cut pool module can get bogged down and the LP
solution generally do not change that drastically from one iteration
to the next anyway.
-
not_fixed_storage_size - integer (2048).
- [p]LP Parameters!not_fixed_storage_size
The not fixed list is a partial list of indices of variables not
in the matrix that have not been fixed by reduced cost. Keeping this
list allows SYMPHONY to avoid repricing variables (an expensive operation)
that are not in the matrix because they have already been permanently
fixed. When this array reaches its maximum size, no more variable
indices can be stored. It is therefore advisable to keep the maximum
size of this array as large as possible, given memory limitations.
-
max_non_dual_feas_to_add_min,
-
-
max_non_dual_feas_to_add_max,
-
-
max_non_dual_feas_to_add_frac
- integer, integer, double (20, 200, .05).
- [p]LP Parameters!max_non_dual_feas_to_add_min
[p]LP Parameters!max_non_dual_feas_to_add_frac
These three parameters determine the maximum number of
non-dual-feasible columns that can be added in any one iteration
after pricing. This maximum is set to the indicated
fraction of the current number of active columns unless this numbers
exceeds the given maximum or is less than the given minimum, in which
case, it is set to the max or min, respectively.
-
max_not_fixable_to_add_min,
-
-
max_not_fixable_to_add_max,
-
-
max_not_fixable_to_add_frac - integer, integer, double (100,
500, .1)
- [p]LP Parameters!max_not_fixable_to_add_max
[p]LP Parameters!max_not_fixable_to_add_frac
As above, these three parameters determine the maximum number of new
columns to be added to the problem because they cannot be priced out.
These variables are only added when trying to restore infeasibility
and usually, this does not require many variables anyway.
-
mat_col_compress_num, mat_col_compress_ratio - integer,
double (50, .05).
- [p]LP Parameters!mat_col_compress_num
[p]LP Parameters!mat_col_compress_ratio
Determines when the matrix should be physically compressed. This only
happens when the number of columns is high enough to make it
``worthwhile.'' The matrix is physically compressed when the number of
deleted columns exceeds either an absolute number and a specified
fraction of the current number of active columns.
-
mat_row_compress_num, mat_row_compress_ratio - integer,
double (20, .05).
- [p]LP Parameters!mat_row_compress_num
[p]LP Parameters!mat_row_compress_ratio
Same as above except for rows.
-
tailoff_gap_backsteps, tailoff_gap_frac - integer, double
(2, .99).
- [p]LP Parameters!tailoff_gap_backsteps
[p]LP Parameters!tailoff_gap_frac
Determines when tailoff is detected in the LP module.
Tailoff is reported if the average ratio of the current gap to the
previous iteration's gap over the last
tailoff_gap_backsteps
iterations wasn't at least
tailoff_gap_frac.
-
tailoff_obj_backsteps, tailoff_obj_frac - integer, double
(2, .99).
- [p]LP Parameters!tailoff_obj_backsteps
[p]LP Parameters!tailoff_obj_frac
Same as above, only the ratio is taken with respect to the change in
objective function values instead of the change in the gap.
-
ineff_cnt_to_delete - integer (0).
- [p]LP Parameters!ineff_cnt_to_delete
Determines after how many iterations of being deemed ineffective a
constraint is removed from the current relaxation.
-
eff_cnt_before_cutpool - integer (3).
- [p]LP Parameters!eff_cnt_before_cutpool
Determines after how many iterations of being deemed effective each
cut will be sent to the global pool.
-
ineffective_constraints - integer
(BASIC_SLACKS_ARE_INEFFECTIVE{2}).
- [p]LP Parameters!ineffective_constraints
Determines under what condition a constraint is deemed ineffective in
the current relaxation. Other possible values are NO_CONSTRAINT_IS_INEFFECTIVE{0}, NONZERO_SLACKS_ARE_INEFFECTIVE{1}, and
ZERO_DUAL_VALUES_ARE_INEFFECTIVE{3}.
-
base_constraints_always_effective - boolean (TRUE).
- [p]LP Parameters!base_constraints_always_effective
Determines whether the base constraints can ever be removed from the
relaxation. In some case, removing the base constraints from the
problem can be disastrous depending on the assumptions made by the cut
generator.
-
branch_on_cuts - boolean (FALSE).
- [p]LP Parameters!branch_on_cuts
This informs the framework whether the user plans on branching on cuts
or not. If so, there is additional bookkeeping to be done, such as
maintaining a pool of slack cuts to be used for branching. Therefore,
the user should not set this flag unless he actually plans on using
this feature.
-
discard_slack_cuts - integer (DISCARD_SLACKS_BEFORE_NEW_ITERATION{0}).
- [p]LP Parameters!discard_slack_cuts
Determines when the pool of slack cuts is discarded. The other option
is DISCARD_SLACKS_WHEN_STARTING_NEW_NODE{1}.
-
first_lp_first_cut_time_out,
-
-
first_lp_all_cuts_time_out,
-
-
later_lp_first_cut_time_out,
-
-
later_lp_all_cuts_time_out -
double (0, 0, 5, 1).
- [p]LP Parameters!first_lp_first_cut_time_out
[p]LP Parameters!first_lp_all_cuts_time_out
[p]LP Parameters!later_lp_first_cut_time_out
[p]LP Parameters!later_lp_all_cuts_time_out
The next group of parameters determines when the LP should give up
waiting for cuts from the cut generator and start to solve the
relaxation in its current form or possibly branch if necessary. There
are two factors that contribute to determining this timeout. First
is whether this is the first LP in the search node of whether it is a
later LP. Second is whether any cuts have been added already in this
iteration. The four timeout parameters correspond to the four possible
combinations of these two variables.
-
no_cut_timeout -
- [p]LP Parameters!no_cut_timeout
This keyword does not have an associated value. If this keyword
appears on a line by itself or with a value, this tells the framework
not to time out while waiting for cuts. This is useful for debugging
since it enables runs with a single LP module to be duplicated.
-
all_cut_timeout - double (no default).
- [p]LP Parameters!all_cut_timeout
This keyword tells the framework to set all of the above timeout
parameters to the value indicated.
-
max_cut_num_per_iter - integer (20).
- [p]LP Parameters!max_cut_num_per_iter
The maximum number of cuts that can be added to the LP in an
iteration. The remaining cuts stay in the local pool to be added in
subsequent iterations, if they are strong enough.
-
do_reduced_cost_fixing - boolean (FALSE).
- [p]LP Parameters!do_reduced_cost_fixing
Whether or not to attempt to fix variables by reduced cost. This
option is highly recommended
-
gap_as_ub_frac, gap_as_last_gap_frac - double (.1, .7).
- [p]LP Parameters!gap_as_ub_frac
[p]LP Parameters!gap_as_last_gap_frac
Determines when reduced cost fixing should be attempted. It is only
done when the gap is within the fraction
gap_as_ub_frac of the upper
bound or when the gap has decreased by the fraction
gap_as_last_gap_frac since the last time variables were fixed.
-
do_logical_fixing - boolean (FALSE).
- [p]LP Parameters!do_logical_fixing
Determines whether the user's logical fixing routine should be used.
-
fixed_to_ub_before_logical_fixing,
-
-
fixed_to_ub_frac_before_logical_fixing -
integer, double (1, .01).
- [p]LP Parameters!fixed_to_ub_before_logical_fixing
[p]LP Parameters!fixed_to_ub_frac_before_logical_fixing
Determines when logical fixing should be attempted. It will be called
only when a certain absolute number and a certain number of variables
have been fixed to their upper bounds by reduced cost. This is because
it is typically only after fixing variables to their upper bound that
other variables can be logically fixed.
-
max_presolve_iter - integer (10).
- [p]LP Parameters!max_presolve_iter
Number of simplex iterations to be performed in the pre-solve for
strong branching.
-
strong_branching_cand_num_max,
-
-
strong_branching_cand_num_min,
-
-
strong_branching_red_ratio -
integer (10, 5, 1).
- [p]LP Parameters!strong_branching_cand_num_max
[p]LP Parameters!strong_branching_cand_num_min
[p]LP Parameters!strong_branching_red_ratio
These three parameters together determine the number of strong
branching candidates to be used by default. In the root node,
strong_branching_cand_num_max candidates are used. On each
succeeding level, this number is reduced by the number
strong_branching_red_ratio multiplied by the square of the level.
This continues until the number of candidates is reduced to
strong_branching_cand_num_min and then that number of candidates
is used in all lower levels of the tree.
-
is_feasible_default - integer (TEST_INTEGRALITY{1}).
- [p]LP Parameters!is_feasible_default
Determines the default test to be used to determine feasibility. This
parameter is provided so that the user can change the default behavior
without recompiling. The only other option is TEST_ZERO_ONE{0}.
-
send_feasible_solution_default - integer
(SEND_NONZEROS{0}).
- [p]LP Parameters!send_feasible_solution_default
Determines the form in which to send the feasible solution. This
parameter is provided so that the user can change the default behavior
without recompiling. This is currently the only option.
-
send_lp_solution_default - integer (SEND_NONZEROS{0}).
- [p]LP Parameters!send_lp_solution_default
Determines the default form in which to send the LP solution to the
cut generator and cut pool. This
parameter is provided so that the user can change the default behavior
without recompiling. The other option is SEND_FRACTIONS{1}.
-
display_solution_default - integer (DISP_NOTHING{0}).
- [p]LP Parameters!display_solution_default
Determines how to display the current LP solution if desired.
See the description of user_display_solution() for other
possible values. This parameter is provided so that
the user can change the default behavior without recompiling.
-
shall_we_branch_default - integer
(USER__BRANCH_IF_MUST{2}).
- [p]LP Parameters!shall_we_branch_default
Determines the default branching behavior. Other values are USER__DO_NOT_BRANCH{0} (not recommended as a default), USER__DO_BRANCH{1} (also not recommended as a default), and USER__BRANCH_IF_TAILOFF{3}. This
parameter is provided so that the user can change the default behavior
without recompiling.
-
select_candidates_default - integer (USER__CLOSE_TO_HALF_AND_EXPENSIVE{10}).
- [p]LP Parameters!select_candidates_default
Determines the default rule for selecting strong branching candidates.
Other values are USER__CLOSE_TO_HALF{10} and
USER__CLOSE_TO_ONE_AND_CHEAP{12}. This
parameter is provided so that the user can change the default behavior
without recompiling.
-
compare_candidates_default - integer
(HIGHEST_LOW_OBJ{2}).
- [p]LP Parameters!compare_candidates_default
Determines the default rule for comparing candidates. See the
description of user_compare_candidates() for other values. This
parameter is provided so that the user can change the default behavior
without recompiling.
-
select_child_default - integer
(PREFER_LOWER_OBJ_VALUE{0}).
- [p]LP Parameters!select_child_default
Determines the default rule for selecting the child to be processed
next. For other possible values, see the description
user_select_child(). This
parameter is provided so that the user can change the default behavior
without recompiling.
-
mc_find_supported_solutions - boolean (FALSE).
- [p]LP Parameters!mc_find_supported_solutions
By default, sym_mc_solve routine will find all the non-dominated
solutions if the problem to be solved is
a bicriteria problem. However, if the user plans to find only the supported
solutions, then, this parameter has to be set before
calling sym_mc_solve routine.
-
mc_rho - double (0.00001).
- [p]LP Parameters!mc_rho
The value used in augmented Chebyshev norm during the bicriteria
solution procedure.
-
generate_cgl_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_cuts
Whether or not to generate cuts using COIN's cut generation library.
Note that, to use CGL cuts, OSI interface has to be used and moreover the
corresponding flags have to be set during installation. See the makefile for
more details.
-
generate_cgl_gomory_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_gomory_cuts
Whether or not to generate Gomory cuts using COIN's cut generation library.
-
generate_cgl_knapsack_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_knapsack_cuts
Whether or not to generate knapsack cover cuts using COIN's cut generation
library.
-
generate_cgl_oddhole_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_oddhole_cuts
Whether or not to generate generalized odd hole cuts using COIN's cut
generation library.
-
generate_cgl_probing_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_probing_cuts
Whether or not to generate probing cuts using COIN's cut generation library.
-
generate_cgl_clique_cuts - boolean (TRUE).
- [p]LP Parameters!generate_cgl_clique_cuts
Whether or not to generate clique cuts using COIN's cut generation library.
-
generate_cgl_flow_and_cover_cuts - boolean (FALSE).
- [p]LP Parameters!generate_cgl_flow_and_cover_cuts
Whether or not to generate flow and cover cuts using COIN's cut generation
library.
-
generate_cgl_rounding_cuts - boolean (FALSE).
- [p]LP Parameters!generate_cgl_rounding_cuts
Whether or not to generate simple rounding cuts using COIN's cut generation
library.
-
generate_cgl_lift_and_project_cuts - boolean (FALSE).
- [p]LP Parameters!generate_cgl_lift_and_project_cuts
Whether or not to generate lift-and-project cuts using COIN's cut generation
library.
Ted Ralphs
2008-10-21